|
|
Phone(s):
(705) 594-2373
|
10402 Hwy 17
Verner Ontario P0H 2M0 |
Honda VersAttach Powerhead - 35cc UMC435LAC1 |
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
Specifications
|
|||||||||||||||||||||||||||||
|
Description
|
|||||||||||||||||||||||||||||
|
ENGINE
|
|||||||||||||||||||||||||||||
|
Carburetor
Diaphragm type w/fuel pump
Idle_Speed
3,100 ± 200 RPM
Spark_Plug
CMR5H (NGK)
Clutch_Size
78 mm (3.0625 in.) Diameter
Engine_Type
Honda GX35, mini 4-stroke, OHC, single cylinder, air-cooled, multi-position (360°)
Displacement
35.8 cc (2.18 CID)
Oil_Capacity
100 cc (3.52 fl. Imp. oz.)
Bore_&_Stroke
39 x 30 mm (1.5 x 1.2 in.)
Fuel_Capacity
0.63 L (22.2 fl. Imp. oz.)
Cooling_System
Forced air
Ignition_System
Transistorized magneto ignition (electronic)
Recommended_Oil
SAE 10W30 API service classification SJ or later
Starting_System
Recoil starter
Stopping_System
Ignition primary circuit ground
Max._No-Load_RPM
10,000 RPM
Recommended_Fuel
Regular unleaded gasoline (86 Octane or higher)
Clutch_Drive_Type
Centrifugal Twin Shoe-Clutch
Honda_Engine_Model
GX35T
Lubrication_System
Oil mist
Maximum_Net_Torque
1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
|
|||||||||||||||||||||||||||||
|
FEATURES
|
|||||||||||||||||||||||||||||
|
Low_engine_noise_and_minimal_vibration
Compact_and_lightweight_ergonomic_design
Fuel_efficient,_user-friendly_and_easy_to_start
Powered_by_35cc_Honda_GX35_OHC_Mini_4-stroke_engine
Wide_variety_of_multi-purpose_attachments_available
Safe_and_secure_SureLoc™_System_–_easy_to_connect
Offers_full_360º_inclinable_operation._Low_engine_noise_and_minimal_vibration
|
|||||||||||||||||||||||||||||
|
LITERATURE
|
|||||||||||||||||||||||||||||
|
Literature
|
|||||||||||||||||||||||||||||
|
PRODUCT DIMENSIONS
|
|||||||||||||||||||||||||||||
|
Overall_Width
32.0 cm (12.6 in.)
Overall_Height
25.5 cm (10.0 in.)
Dry_Weight_(without_attachment)
6.0 kg (13.2 lbs.)
Overall_Length_(without_attachment)
114.5 cm (45.1 in.)
|
|||||||||||||||||||||||||||||
|
ADDITIONAL INFORMATION
|
|||||||||||||||||||||||||||||
|
Handle_Type
Loop
Shaft_Support
Rubber Mounted Bushings (4)
Drive_Shaft_Type
Rigid Steel
Shoulder_Harness
Standard
Blade_Barrier_Kit
Standard
Engine_Stop_Switch
Slide type switch
Main_Pipe_Diameter
26 mm (1.02 in.)
Throttle_Control_Type
Two-motion trigger type
Safety_Goggles_(A.N.S.I_Std.)
Standard
Main_Pipe_Thickness_/_Material
2 mm (0.08 in.) Aluminum
|