|
|
Phone(s):
(705) 594-2373
|
10402 Hwy 17
Verner Ontario P0H 2M0 |
Honda U-Handle 25 cc HHT25SUT4C |
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
Specifications
|
|||||||||||||||||||||||||||||||||||||||||
|
Description
|
|||||||||||||||||||||||||||||||||||||||||
|
ENGINE
|
|||||||||||||||||||||||||||||||||||||||||
|
Spark_Plug
CMR5H (NGK)
Air_Cleaner
Semi-dry type
Clutch_Size
54 mm (2.125 in.) Diameter
Engine_Type
Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
Fuel_Primer
Anti-flood type
Displacement
25 cc (1.53 CID)
Oil_Capacity
80 cc (2.82 fl. Imp. oz.)
Bore_&_Stroke
35 X 26 mm (1.4 X 1 in.)
Fuel_Capacity
0.5 L (17.6 fl. Imp. oz.)
Cooling_System
Forced air
Ignition_System
Transistorized flywheel magneto (electronic)
Starting_System
Recoil starter
Stopping_System
Ignition primary circuit ground
Recommended_Fuel
Regular unleaded gasoline (87 Octane)
Clutch_Drive_Type
Centrifugal Twin Shoe-Clutch
Clutch_Engagement
4;200 ± 200 RPM
Honda_Engine_Model
GX25
Lubrication_System
Oil mist
Maximum_Net_Torque
1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
Fuel_Consumption_(approximate)
0.5 L/hr (0.11 Imp. gal./hr)
Max._No-Load_RPM*_(Requires_Blade_Barrier)
10,000 RPM
|
|||||||||||||||||||||||||||||||||||||||||
|
FEATURES
|
|||||||||||||||||||||||||||||||||||||||||
|
Bevel_gear_drive
Low-tone_muffler_for_quieter_operation
25_cc_Honda_GX25_OHC_Mini_4-stroke_engine
Electronic_ignition_for_dependable_starts
Bike-style_handlebar_with_fingertip_controls
Multi-strand_drive_cable_that_absorbs_vibration_and_impacts
Includes_Semi-matic_(tap-and-go)_trimmer_head_and_4-tooth_brush-cutting_blade_with_blade_guard_and_mounting_hardward,_as_well_as_professional_double-loop_harness
|
|||||||||||||||||||||||||||||||||||||||||
|
PRODUCT DIMENSIONS
|
|||||||||||||||||||||||||||||||||||||||||
|
Overall_Width
(handlebars) 60.5 cm (23.8 in.)
Overall_Height
41.5 cm (16.3 in.)
Dry_Weight_(Without_Blade)
6.15 kg (13.6 lbs.)
Overall_Length_With_Cutter_Mounted
191.0 cm (75.2 in.)
|
|||||||||||||||||||||||||||||||||||||||||
|
ADDITIONAL INFORMATION
|
|||||||||||||||||||||||||||||||||||||||||
|
Line_Type
Quiet LineTM
Gear_Ratio
1.235 Input shaft: 1 (Output Shaft)
Handle_Type
U-shaped (bike type handle)
Cutting_Width
43.2 cm (17 in.)
Drive_Shaft_Type
Flexible steel cable
Steel_Blade_Guard
Standard
Engine_Stop_Switch
Slide type switch
Main_Pipe_Diameter
25.4 mm (1 in.)
Anti-Vibration_System
Standard
Cutting_Line_Diameter
2.41 mm (0.095 in.)
Final_Drive_Gear_Case
Helical cut bevel gears / Sealed ball bearings
Throttle_Control_Type
Two-motion trigger type
Cutting_Head_(Optional)
Manual, pro-tap, semi-pro
Cutting_Head_(Standard)
Semi-matic line feed nylon (tap-and-go)
Trimmer_Guard_With_Cutter
Standard
Safety_Goggles_(A.N.S.I_Std.)
Standard
Main_Pipe_Thickness_/_Material
1.5 mm (0.06 in.) / Aluminum
Professional_Double_Loop_Harness
Standard
|
|||||||||||||||||||||||||||||||||||||||||